Yamak Contracting Company

+961 71061010

24/7 Customer Support

Mon - Sat: 8:00 - 19:00

Visit our showroom

JA-120N Bus module for control of an electric lock


Out of stock

SKU JA-120N Category
SKU JA-120N Category


Out of stock


The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

JA-120N Bus module for control of an electric lock

The JA-120N can be conveniently installed in all places where an external power supply for electric lock control would be difficult to install. To module responds to a PG output of the control panel or it can be activated with a button connected to the IN input (it can be optionally locked by section control). The module is addressable and it occupies one position in the system

Technical specifications

Power supply via the control panel bus 12 V (9 – 15 V)
Back-up battery 3x 1.2V NiMh Eneloop AA HR-3UTGA 1900mAh
Module consumption in idle state 10mA / 60 mA (without / with battery recharging)
DOOR output load impulse (1s) 600 mA, permanent 300 mA
Recommended locks: manufacturer: Bera s.r.o – type: Befo 11211 or Befo 31211 (requiring external power supply)
Dimensions: 90 x 90 x 35 mm
Environmental class according to EN 50131-1 II. General indoor
Operation temperature range 0°C to +40°C (for NiMh Eneloop)
-10°C to + 40°C (for NiCd)
Security grade 2 in acc. with EN 50131-1, EN 50131-3,
It also meets the requirements of EN 50130-4, EN 55022, EN 60950-1

Additional information


Jablotron (Europe)

Device Type

Price Range



There are no reviews yet.

Be the first to review “JA-120N Bus module for control of an electric lock”

Your email address will not be published. Required fields are marked *